Meijer Notebook Informations techniques télécharger pdf (Page 99)

If it is necessary to replace the display bezel or any of the display assembly subcomponents:

a. Remove the two Mylar screw covers (1) and the two Phillips PM2.5×6.0 screws (2) that

secure the display bezel to the display assembly. The Mylar screw covers are available in the

Display Screw Kit, spare part number 640218-001.

b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom

edge (3) of the display bezel until the bezel disengages from the display enclosure.

c. Remove the display bezel (4). The display bezel is available using spare part number

640204-001.

6. If it is necessary to replace the webcam/microphone module:

a. Detach and release the webcam/microphone module (1) as far as the webcam/microphone

module cable allows. (The webcam/microphone module is attached to the display enclosure

with double-sided tape.)

Component replacement procedures

Meijer.com

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 129 130

Pas de commentaire

Meijer Notebook Informations techniques Page 99